Selec RPS40-48-CE

DIN RAIL MOUNT 40W POWER SUPPLY

Product Code:RPS40-48-CE

Description:40 W, 48 V / 0.83 A DIN rail mounted Power supply in plastic Housing

Certification:CE

Turn On Time	< 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
Input Frequency	50/60 Hz
< 150 gms	35 mm DIN Rail
Output Short Circuit Protection	Hiccup mode when output is shorted; Autorecovery type.
Altitude	2000 m
Line Regulation	± 1 %
Overload Protection	> 110 % of rated output current; Hiccup mode; Autorecovery type
Rise Time	< 100 ms
Humidity	5 to 95 % RH, Non condensing
Output Power	40 W
Storage Temperature	- 40°C to + 85°C
Overtemperature Protection	Power supply shuts down when the temperature of PCB below main transformer reaches typically 120°C;Turns on only after the temperature falls below 90°C typically and AC power is recycled thereafter
Output Voltage	12 V to 48 V
Load Regulation	± 1 %
Cooling	Natural convection cooled
Overvoltage Protection	Hiccup mode when output over voltage occur; Autorecovery type
Dimension	35 x 90 x 60 mm ( W x H x D )
Input Voltage	90 - 264 VAC (127 - 370 VDC)
Hold Up Time	≥ 25 ms @ 230 VAC & ≥ 6 ms @ 115 VAC, Full load
Inrush Current	< 60 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Weight	< 150 gms
Voltage Tolerance	± 1 %
Operating Temperature	- 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C. -25°C to 0°C startup is guaranteed with specification deviation(Output ripple can be more than 10 % of the output voltage.)

MIA Enterprises

Authorized Selec Dealer and Supplier

+91 95000 43652

Satisfied Customers

Product Categories

Products

Years In Industry