Home>Power Supply and Control>Power Supplies>DIN Rail Mount Power Supply>DIN RAIL MOUNT 240W POWER SUPPLY>RPS240-12-CU
Selec RPS240-12-CU
DIN RAIL MOUNT 240W POWER SUPPLY
Varinat Details
Description:216W, 12V/18A DIN rail mounted Power Supply in Plastic Housing
Product Code:RPS240-12-CU
Certification:CE,UL
- Supports 90 - 264 VAC / 127 - 370 VDC
- Power factor > 0.95 @ full load over entire input range
- Protection against short circuit, overload, overvoltage & over temperature
- Cooling by free air convection
- UL 508 approved (E522848)
- Efficiencies up to 93 %
- DC OK Relay contact
Bulk Inquiries? Special Rates Available!
Specification Table
| Load Regulation | ± 1 % |
| Cooling | Natural convection cooled |
| Dimension | 50 x 136 x 135 mm (W x H x D) |
| Humidity | 5 to 95 % RH, Non condensing |
| Inrush Current | < 48 Amps; Measured at 264 VAC, 25°C Ambient, Cold start |
| Line Regulation | < 1% of Vout |
| Operating Temperature | - 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C,- 25°C to 0°C start-up is guaranteed with specification deviation |
| Input Frequency | 50/60 Hz |
| Weight | 645 gms |
| Altitude | 2000 m |
| Overload Protection | > 110% of rated output current; Hiccup type; Autorecovery |
| Output Voltage | 12V to 48V |
| Output Power | 240 W |
| Rise Time | < 100 ms |
| Output Short Circuit Protection | Hiccup mode when output is shorted; Autorecovery type |
| Storage Temperature | - 40°C to + 85°C |
| Turn On Time | < 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load |
| Hold Up Time | ≥60ms at 230V AC & ≥15ms at 115V AC, Full load |
| Mounting | 35 mm Din rail |
| Overvoltage Protection | Latched type; Input AC power to be recycled to recover the power supply |
| Voltage Tolerance | ± 1 % |
Downloads
Sold By
MIA Enterprises
Authorized Selec Dealer and Supplier
+91 95000 43652
mia_entp@yahoo.com