Home>Power Supply and Control>Power Supplies>DIN Rail Mount Power Supply>DIN RAIL MOUNT 15W POWER SUPPLY
Selec RPS15
DIN RAIL MOUNT 15W POWER SUPPLY
- Supports 90 - 264 VAC / 127 - 370 VDC
- Efficiencies up to 82 %
- Protection against short circuit, overload
- Cooling by free air convection
- Full power between -25°C to +50°C
Bulk Inquiries? Special Rates Available!
Specification Table
| Mounting | 35 mm DIN Rail |
| Overload Protection | 110 % to 150 % of rated output current; Hiccup type, Autorecovery |
| Turn On Time | < 1 sec, full load |
| Cooling | Natural convection cooled |
| Input Voltage | 90 - 264 VAC (127 - 370 VDC) |
| Output Power | 15 W |
| Humidity | 5 to 95 % RH, Non condensing |
| Weight | < 100 gms |
| Voltage Tolerance | ± 1 % |
| Storage Temperature | -40°C to +85°C |
| Load Regulation | ± 1 % |
| Altitude | 2000 m |
| Input Frequency | 50/60 Hz |
| Output Voltage | 5 V to 24 V |
| Operating Temperature | -40°C to +70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C. Note : Only start up guaranteed at -40°C with spec deterioration. |
| Output Short Circuit Protection | Hiccup mode when output is shorted; Autorecovery type |
| Dimension | 17.5 x 90 x 65 mm(W x H x D) |
| Line Regulation | ± 1 % |
| Rise Time | < 100 ms |
| Hold Up Time | 30 ms @ 230 VAC & 10 ms @ 115 VAC, full load |
| Inrush Current | < 30 Amps; Measured at 264 VAC, 25°C Ambient, Cold start |
Downloads
Sold By
MIA Enterprises
Authorized Selec Dealer and Supplier
+91 95000 43652
mia_entp@yahoo.com